Maintenance methods for dental high-speed mobile phones mainly include the following aspects:
Alternate use: Doctors usually use two high-speed mobile phones alternately, and replace another one every ten minutes. This can greatly reduce the use time of a single mobile phone, thereby extending the service life of the mobile phone. According to statistics, about 60% of mobile phone bearing damage is due to "fatigue" caused by excessive use.
Cleaning and lubrication:
Cleaning: Use a cleaning agent to clean the air and water circuits inside the mobile phone to ensure that no foreign matter enters the bearing and reduce friction. When cleaning, the mobile phone should be turned upside down to allow the cleaning agent to fully flow into the inside of the machine head. The cleaning time is about 4 seconds.
Lubrication: Use professional mobile phone lubricants for lubrication to ensure that the bearings remain lubricated when rotating at high speeds. The lubricating oil will be lost with use, so it needs to be filled with oil before each use.
Regular maintenance:
Cleaning the internal pipelines: Use hot water or a pressure water gun to clean the internal pipelines to ensure that no impurities remain. After cleaning, use a pressure air gun to dry the internal pipelines.
High temperature and high pressure disinfection: Send the mobile phone to the Class B disinfection furnace for high temperature and high pressure disinfection, and ensure that it is completely dry.
Ultraviolet disinfection: Store the mobile phone in the ultraviolet disinfection box to complete the maintenance procedure.
Suitable storage space: After use, put the mobile phone in a suitable storage space to avoid collision or fall, and keep it in good condition.