Operation process of intraoral sandblasting machine

‌Preliminary preparation‌: Make sure there is no oil, dust or other impurities in the oral cavity and keep it clean.
‌Connect the equipment‌: Connect the sandblasting machine to the water and air output system of the comprehensive treatment table.
‌Adjust parameters‌: Adjust the pressure and type of abrasive for sandblasting as needed.
‌Operate the sandblasting machine‌: Start the equipment and spray the abrasive at high speed onto the tooth surface to remove stains and pigments.
‌Post-treatment‌: Perform proper oral care and cleaning after sandblasting.